bradley-corporation
Results: 31
Futura Faucet Model 900
Electronic faucet turns on automatically when user's hands enter infrared detection area within bowl perimeter, turns off when hands are removed. Operates at pre-set temperature, either warm or cold water. Heat valve optional. Solenoid has few moving parts. Operation unaffected by most chemicals and minerals frequent in water supplies. Flow constant at all pressures. Self-cleaning diffuser. Chrome-plated, solid cast brass body. Sensor shuts off water after 30 to 45 seconds if something is left i
Hinged Corner Shower Seat (Model 954) & Fixed Corner Shower Seat (Model 9541)
The Hinged Corner Shower Seat ##954 is a folding shower seat that is hinged on one wall, and folds down for use. The seat is made of 16 gauge stainless steel. Joints are 3/4 inch channel formed return edges, corners are Heliarc welded and ground smooth for maximum rigidity and safety, and it has a piano hinge. The support angle and the retaining clip are made of stainless steel. The Fixed Corner Shower Seat ##9541 has the same dimensions and specifications as the Hinged Corner Shower Seat, but d
Metering Faucet (Model 90 - 75)
Metering faucet, push button requires 3 pounds of pressure for operation. Self closing, remains open at least 10 seconds. For bathroom lavatory.
200 Series Towel Dispenser (Model 250-15)
The 200 Series Towel Dispenser ##250-15 is a wall mounted dispenser of paper towels designed for use in public rest rooms. The unit is fabricated of 22 gauge stainless steel with exposed surfaces in architectural satin finish. The dispenser has smooth corners and a tumbler lock. The cabinet is hinged at the bottom to allow facilitated filling. The refill indicator slot is located on the face of the cabinet. The dispenser opening has a rolled edge. The unit is surface mounted on the wall with mou
Bradpack Wash Center (Models 1027, 1127, 1128, & 1123)
Lavatory with blade faucets, meets ANSI A117.1 1980 specifications. Countertop model, stainless steel, 17 1/8 by 11 3/4 inches, 5 inch apron. Mirror, towel dispenser, optional cup dispenser, waster receptacle, light, electrical outlet optional.
800 Series Grab Bar For Shower (Models 032 & 033)
The 800 Series Grab Bar for Shower ##032/033 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped bar that attaches to the wall at two points on the vertical bar and one point on the horizontal bar. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##033) or left (##032) handed configurations. DIMENSIONS (LxWxH): 24 x 1.5 x 34 inches with 1, 1.25, or 1.5
800 Series Grab Bar For Shower (Model 007)
The 800 Series Grab Bar for Shower ##007 is a stainless steel wall mounted grab bar designed for shower applications. The support consists of a U-shaped bar that attaches to the wall in 4 places. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 25 x 1.5 x 34 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 9 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Pol
800 Series Grab Bar For Bathtub (Models 026 & 027)
The 800 Series Grab Bar for Bathtub, ##026/027, is a stainless steel corner wall grab bar designed to be wall mounted at the corner end of the tub. The bar consists of one L-shaped bar and one support extension. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##026) or left (##027) handed configurations. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 4 to 5 pound
Corner Tub Bar.
Stainless steel corner wall grab bar. 1, 1 1/4 or 1 1/2 inch diameter. 3 1/2 inch wall clearance. Satin or safety grip finish. 20 inches by 36 inches.
800 Series Grab Bar For Bathtub (Models 023 & 022)
The 800 Series Grab Bar for Bathtub ##023/022 is a stainless steel wall mounted grab bar for corner tub applications. The bar consists of an L-shaped horizontal bar that attaches to both walls, and a vertical bar that mounts in the floor. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available in right (##022) or left (##023) handed configurations. DIMENSIONS (LxWxH): 40 x 8.5 x 32 inches with 1, 1.25, or 1.5 inch diameter
800 Series Grab Bar For Bathtub (Models 031 & 030)
The 800 Series Grab Bar for Bathtub ##030/031 is a stainless steel wall mounted grab bar designed for corner tub applications. The bar consists of an L-shaped horizontal bar with a perpendicular upright at one end. These bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Available with right (##030) or left (##031) handed configurations. DIMENSIONS (LxWxH): 36 x 20 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 7 to 8 poun
800 Series Grab Bar For Bathtub (Model 024)
The 800 Series Grab Bar for Bathtub ##024 is a stainless steel wall mounted grab bar designed for use at the wall end of a bathtub. The support consists of a U-shaped bar with support extensions at either end. The bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 6 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Gr
800 Series Grab Bar For Bathtub (Model 021)
The 800 Series Grab Bar for Bathtub ##021 is a stainless steel wall to floor grab bar designed for the wall end of a bathtub. The support consists of a U-shaped horizontal bar that attaches to the wall and 2 perpendicular bars that mount in the floor on either side of the tub. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 40 x 12 x 32 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 8 to 10 pounds. FINI
800 Series Grab Bar For Toilet (Model 054)
The 800 Series Grab Bar for Toilet ##054 is a stainless steel wall to floor grab bar for unilateral support when accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to the wall and to the floor with a 3-inch extension at the floor mounting. This bar is available with a concealed or exposed mounting. DIMENSIONS (LxH): 33 x 30 inches with either 1.25 or 1.5 inch diameter tubing (1-inch tubing not available with this bar). WEIGHT: 6 to 7 pounds. FINISH: Stan
800 Series Grab Bar For Toilet (Models 010 & 011)
The 800 Series Grab Bar for Toilet ##010/011 is a stainless steel wall to floor grab bar for unilateral support while accessing a toilet. The support consists of an L-shaped bar bent at 90 degrees that attaches to both the wall and the floor, and an outrigger, or extension floor mount. These bars are available with a concealed or exposed mounting, right (##011) or left (##010) handed configuration, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 6 x 33 inches with 1
800 Series Grab Bar For Toilet (Model 039)
The 800 Series Grab Bar for Toilet ##039 is a stainless steel floor mounted safety frame for a toilet. The frame consists of two parallel rails that form an upside down U shape and mount in the floor at 4 places. A perpendicular rail runs behind the toilet and connects the two rails. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 22 x 22 x 28 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Stan
800 Series Wall Grab Bar For Toilet (Model 117)
The 800 Series Wall Grab Bar for Toilet ##117 is a stainless steel wall mounted grab bar. The frame consists of 2 U-shaped railings with a perpendicular bar between rails situated 5 inches from the wall when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 24 x 24 x 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip wi
800 Series Corner Wall Grab Bar For Toilet (Models 119 & 120)
The 800 Series Corner Wall Grab Bar for Toilet ##119/120 is a stainless steel grab bar configured for end or corner stalls. The grab bar consists of a U-shaped bar that goes on the open side of the toilet, and a perpendicular bar that mounts on the wall side of the toilet 5 inches from the opposing wall. These grab bars are avaialble with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. Configurations for right (##120) or left (##119) handed mounting. DIMENSIO
800 Series Wall Grab Bar For Toilet (Models 115 & 116)
The 800 Series Wall Grab Bar for Toilet ##115/116 is a stainless steel U-shaped grab bar with extension support. These grab bars are available with a concealed or exposed mounting. All styles have a standard safety clearance of 1.5 inches, and are available in Right (##116) or Left (##115) handed configurations. DIMENSIONS: 16 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 6 pounds.
800 Series Wall Grab Bar For Toilet (Model 012)
The 800 Series Wall Grab Bar for Toilet ##012 is a stainless steel wall to floor double bar for toilets. The grab bar consists of two parallel bars that go on either side of the toilet, like a safety frame, with one perpendicular bar situated approximately 5 inches from the wall, when mounted. These grab bars are available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS (LxWxH): 30 x 24 x 33 inches with 1, 1.25, or 1.5 inch diameter tubing. FI
800 Series Corner Wall Grab Bar For Toilet (Model 059)
The 800 Series Corner Wall Grab Bar for Toilet ##059 is a stainless steel wall mounted safety bar. The bar consists of two perpendicular sections that extend from the walls 6 inches. This corner bar attaches in three places, two on the side wall and one on the back wall. This grab bar is available with a concealed or exposed mounting, and have a standard safety clearance of 1.5 inches. DIMENSIONS: 36 x 52 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety G
800 Series 97 Degree Angle Wall Grab Bar For Toilet (Models 040 & 041)
The 800 Series 97 Degree Angle Wall Grab Bar for Toilet ##040/041 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available with right (##041) or left (##040) handed configurations. DIMENSIONS: Bar extends 32 inches vertically, and 9 inches horizontally with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Fini
800 Series 90 Degree Angle Wall Grab Bar For Toilet (Models 005 & 006)
The 800 Series 90-Degree Angle Wall Grab Bar for Toilet ##005/006 is a stainless steel wall mounted grab bar. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. The bar comes in right (##006) or left (##005) handed configurations. DIMENSIONS: Bar extends vertically 32 inches and horizontally 16 inches with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polish
800 Series 120 Degree Angle Wall Grab Bar For Toilet (Model 004)
The 800 Series 120 Degree Angle Wall Grab Bar for Toilet ##004 is a stainless steel wall mounted grab bar. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Both segments of the bar are 12 inches each; mountings are 21 inches apart. Tubing comes in 1, 1.25, or 1.5 inch diameters. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 3 pounds.
800 Series Wall Grab Bar For Toilet (Model 003)
The 800 Series Wall Grab Bar for Toilet ##003 is a stainless steel grab bar that consists of a straight bar with a center post and one end return. This grab bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: 48, 52, or 54 inch standard lengths with 1, 1.25, or 1.5 inch diameter tubing. FINISH: Standard Satin, Sanitary Safety Grip, Bright Polished, or Safety Grip with Polished Finish. WEIGHT: 5 to 6 pounds.
800 Series Grab Bar For Toilet (Models 001 & 002)
The 800 Series Grab Bar for Toilet ##001/002 is a stainless steel, wall mounted straight bar designed for horizontal attachment next to a toilet. This support attaches to the wall in two places for lengths up to 54 inches (##001), and has a center support mount for lengths over 54 inches (##002). This bar is available with concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. DIMENSIONS: Model 001 is available in the following lengths: 12, 16, 18, 24, 30, 32, 36, 42,
Fixed And Adjustable Tilt Framed Mirrors (Models 740 & 741)
The Fixed Tilt (##740) and Adjustable Tilt (##741) Framed Mirrors are tilting mirrors designed for use in public restrooms. These mirrors have 18 gauge stainless steel frames with Heliarc welded corners and 20 gauge angle stiffeners wleded to the frame for additional rigidity. The backs of the mirrors are 20 gauge galvanized steel, secured to the frame with concealed screws. The mirrors are 1/4-inch float glass, triple silver plated with an electro-copper plated layer and thermosetting infrared
Folding Shower Seat (Models 956 & 9561)
The Folding Shower Seat ##956 and ##9561, is a wall mounted shower seat designed for public facilities that folds up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The Wall bracket is made of 16 gauge stainless steel with piano hinges. The retaining bracket is 11 gauge stainless steel with a positive bullet-type catch designed to hold the seat securely in an up or down position. The seat is blow-molded polyethylene that will not ret
Folding Teakwood Shower Seat (Model 9559)
The Folding Teakwood Shower Seat ##9559 is designed to be wall mounted in the shower and to fold up and out of the way when not in use. The frame is made of 18 gauge stainless steel tubing with Heliarc welding. The seat is made of 3 handrubbed teakwood slats with rounded edges. The wall bracket is made of 16 gauge stainless steel with piano hinges, and the retaining bracket is 11 gauge stainless steel with positive, bullet-type catch to hold the seat securely in an up or down position. MOUNTING:
800 Series Grab Bar For Shower (Models 034 & 035)
The 800 Series Grab Bar for Shower ##034/035 is a stainless steel wall mounted grab bar for corner shower applications. The support consists of an L-shaped horizontal bar with a perpendicular upright at one end. This bar is available with a concealed or exposed mounting, and has a standard safety clearance of 1.5 inches. Available in right (##035) or left (##034) handed configurations. DIMENSIONS (LxWxH): 26 x 26 x 24 inches with 1, 1.25, or 1.5 inch diameter tubing. WEIGHT: 6 to 7 pounds. FINIS
200 Series Hand / Hair Dryer
The 200 Series Hand/Hair Dryers are electric dryers designed for one handed use in public restrooms. The cover, nozzle, and pushbutton are made of rust and corrosion free diecast zinc with satined chrome over a nickel finish. The motor is a PSC induction motor (brushless), 1/10 HP, thermally protected, with self aligning quiet bearings and resilient ring motor mounts. The heating element is a 2000 watt nickel chromium blower that is inlet mounted (inaccessible through the nozzle), and protected